How to troubleshoot a mining rig that is not detecting a GPU?

If your mining rig shows "No GPUs found," check physical connections, test the GPU on another system, verify BIOS/PCIe settings, and ensure proper power supply and driver installation.

Aug 13, 2025 at 01:28 am

Understanding the Initial Signs of GPU Detection Failure

When a mining rig fails to detect a GPU, the issue can manifest in several ways. The mining software may report "No GPUs found" or display a blank list of available devices. The motherboard’s POST (Power-On Self-Test) may not recognize the GPU, leading to no video output if the GPU is the primary display adapter. In headless setups, the absence of GPU data in monitoring tools like HiveOS dashboard, NiceHash QuickMiner, or EthOS indicates a detection problem. It's crucial to determine whether the GPU is completely invisible to the system or if it’s being partially recognized but not utilized. This distinction helps narrow down whether the issue lies in hardware, firmware, or software configuration.

Verifying Physical Connections and Power Supply

Before diving into software diagnostics, ensure all physical components are properly connected. A loose or improperly seated GPU is a common cause of non-detection. Carefully remove and reseat the GPU in its PCIe slot, making sure it clicks into place securely. Confirm the PCIe riser cable is fully inserted on both the motherboard and GPU ends. Use a different riser to rule out cable faults. Check that the GPU is receiving adequate power by inspecting the PCIe power connectors from the PSU. Some high-wattage GPUs require two 8-pin or 6+2 pin connectors. Use a multimeter to verify the PSU is delivering stable 12V on the PCIe power lines. A failing or underpowered PSU can prevent the GPU from initializing. Replace the power cable or PSU if voltage drops are detected.

Testing GPU on a Known Working System

To isolate the problem, remove the undetected GPU and install it in a separate, functional PC or mining rig. Boot the system and check Device Manager (on Windows) or run lspci | grep VGA (on Linux) to see if the GPU appears. If the GPU is detected on another system, the issue likely resides in the original rig’s motherboard, BIOS settings, or PCIe configuration. If the GPU remains undetected elsewhere, the GPU itself may be faulty. In such cases, inspect the GPU for physical damage, burnt components, or capacitor leaks. Try flashing the GPU’s BIOS using a known-good ROM file if it powers on but isn’t recognized, though this requires advanced tools like a CH341A programmer.

Checking Motherboard and BIOS Configuration

The motherboard plays a critical role in GPU detection. Enter the BIOS setup by pressing Del, F2, or F12 during boot (varies by manufacturer). Navigate to the Advanced > PCIe Configuration section. Ensure the PCIe slot used by the GPU is set to Gen3 or Gen2 mode, as some older GPUs fail to initialize under Gen4. Disable CSM (Compatibility Support Module) if using UEFI-based mining OS, or enable it if using legacy systems. Set the primary display adapter to PCIe instead of iGPU or Auto. If multiple GPUs are installed, confirm the BIOS detects other cards—this helps determine if the issue is isolated to one slot or widespread. Update the motherboard’s BIOS to the latest version, as firmware updates often resolve PCIe enumeration bugs.

Operating System and Driver-Level Diagnostics

Once hardware checks are complete, focus on the software stack. Boot the mining OS and open a terminal. Run nvidia-smi for NVIDIA GPUs or clinfo for AMD cards to check driver-level detection. If these commands return no output, the kernel isn’t loading the GPU driver. Reinstall the appropriate driver—use NVIDIA’s official .run file or AMDGPU PRO installer depending on the card. On Linux, ensure the nomodeset kernel parameter is not blocking GPU initialization. Edit the GRUB configuration and remove nomodeset if present, then reboot. For rigs using HiveOS, switch to "Legacy" kernel or "Long-lived" kernel via the web interface to improve hardware compatibility. Reboot and check the device list again.

Adjusting Kernel Parameters and PCIe Enumeration

Linux-based mining systems sometimes fail to enumerate GPUs due to PCIe bus conflicts. Access the rig’s console and run lspci -v | grep -i vga to list all detected graphics devices. If the GPU is missing from this output, the kernel isn’t seeing it at the hardware level. This can stem from PCIe bandwidth allocation issues. Add kernel boot parameters such as pci=nommconf or pci=noacpi in GRUB to alter PCIe probing behavior. Another effective parameter is reboot=pci, which forces PCIe re-enumeration on reboot. For rigs with many GPUs, set NVreg_RegistryDwords="PerfLevelSrc=0x2222" in NVIDIA’s modprobe configuration to prevent driver timeouts during initialization. Apply changes, reboot, and recheck detection.

Frequently Asked Questions

Why does my mining OS show "GPU 0: Unknown" in the dashboard?

This typically indicates the driver loaded the GPU but cannot identify its model. Update the GPU firmware or reinstall the driver stack. On HiveOS, use the "Reinstall Drivers" option in the web interface.

Can a faulty PCIe riser cause complete GPU non-detection?

Yes. A damaged riser can break the data or power connection between the motherboard and GPU. Test with a known-good riser or swap positions with a working GPU to confirm.

What should I do if only one GPU in a multi-GPU rig is not detected?

Isolate the issue by swapping the undetected GPU with a working one in the same slot. If the problem follows the GPU, it’s faulty. If the same slot fails to detect any GPU, the slot or riser is defective.

Does GPU detection depend on the type of PSU used?

Yes. Mining rigs require high-quality, continuous-output PSUs with sufficient PCIe power connectors. Low-tier PSUs may deliver unstable voltage, preventing GPU initialization. Use units rated at least 80 Plus Bronze with dedicated +12V rails.